It is possible to reverse the effect of the super absorbent polymer (SAP) See below Basically there are 3 ways; 1- Dry the product - at this time it can be reused 2- Mix with salted water (or add salt and stir). The water will come out of the gel ...
Information needed to enable us to calculate required SAP Quantity of water mixed with the sediment. Note: Very often people don't have this info. If it is the case, we need the following info to calculate the quantity Quantity of sediment to ...
There are too many factors to consider when determining drying time (room temperature, added heat, dry or humid environment). But the tests that Recyc PHP inc made in an oven at 100 Celsius seemed to show that it took 1.5 times longer to dry 100 ml ...
Here is the info we know about this procedure. Our infos are based those documents: EPA - US Environmental protection agency - TCLP Method 1311 EHSO - Environment, Health and Safety Online - Hazardous waste fact sheet TCLP In the EPA document, The ...
We have run testing on icepack prototypes comparing surface temperature. The prototypes were made with a poly film 4 mil envelope with different contents. The frozen products were laying flat on an open mesh surface in a 17 deg C environment. The ...